ZyXEL Communications XGS4700-48F - Port Setup

Chapter 8 Basic Setting
XGS4700-48F User’s Guide
115
8.7 Port Setup
Use this screen to configure Switch port settings. Click Basic Setting > Port
Setup in the navigation panel to display the configuration screen.
Figure 41 Basic Setting > Port Setup
IP Subnet
Mask
This field displays the subnet mask of the Switch in the IP domain.
VID This field displays the VLAN identification number of the IP domain on the
Switch.
Delete Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Cancel Click Cancel to clear the Delete check boxes.
Table 13 Basic Setting > IP Setup (continued)
LABEL DESCRIPTION