ZyXEL Communications XGS4700-48F - Tutorials; Chapter 6 Tutorials; How to Use DHCP Snooping on the Switch

XGS4700-48F User’s Guide
71
CHAPTER 6
Tutorials
This chapter provides some examples of using the web configurator to set up and
use the Switch. The tutorials include:
• How to Use DHCP Snooping on the Switch
• How to Use DHCP Relay on the Switch
• How to Use PPPoE IA on the Switch
• How to Use Error Disable and Recovery on the Switch
• How to Set Up a Guest VLAN
• How to Configure Routing Policy
6.1 How to Use DHCP Snooping on the Switch
You only want DHCP server A connected to port 5 to assign IP addresses to all
devices in VLAN 100. Create a VLAN containing ports 5, 6 and 7. Connect a
computer M to the Switch’s MGMT port.
Figure 32 Tutorial: DHCP Snooping Tutorial Overview
Note: For related information about DHCP snooping, see Section 26.1 on page 261.
VLAN 100
A
B
M
C