Chapter 22 Queuing Method
XGS4700-48F User’s Guide
219
22.2 Configuring Queuing
Click Advanced Application > Queuing Method in the navigation panel.
Figure 98 Advanced Application > Queuing Method
The following table describes the labels in this screen.
Table 55 Advanced Application > Queuing Method
LABEL DESCRIPTION
Port This label shows the port you are configuring.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use
this row first to set the common settings and then make adjustments on a
port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
them.
To Next Page
Loading...
