ZyXEL Communications XMG1930-30 - Page 199

Chapter 26 SNMP
XMG1930 Series User’s Guide
199
Table 87 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the Switch is turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the Switch restarts.
fanspeed zyHwMonitorFanSpeedOutOfR
ange
1.3.6.1.4.1.890.1.15
.3.26.2.1
This trap is sent when the fan speed goes
above or below the normal operating
range.
zyHwMonitorFANSpeedOutOfR
angeRecovered
1.3.6.1.4.1.890.1.15
.3.26.2.6
This trap is sent when the fan speed is
recovered from the out of range to normal
operating range.
temperature zyHwMonitorTemperatureOut
OfRange
1.3.6.1.4.1.890.1.15
.3.26.2.2
This trap is sent when the temperature goes
above or below the normal operating
range.
zyHwMonitorTemperatureOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15
.3.26.2.7
This trap is sent when the temperature is
recovered from the out of range to normal
operating range.
voltage zyHwMonitorPowerSupplyVolt
ageOutOfRange
1.3.6.1.4.1.890.1.15
.3.26.2.3
This trap is sent when the voltage goes
above or below the normal operating
range.
reset zySysMgmtUncontrolledSystem
Reset
1.3.6.1.4.1.890.1.15
.3.49.2.1
This trap is sent when the Switch
automatically resets.
zySysMgmtControlledSystemR
eset
1.3.6.1.4.1.890.1.15
.3.49.2.2
This trap is sent when the Switch resets by an
administrator through a management
interface.
zySysMgmtBootImageInconsist
ence
1.3.6.1.4.1.890.1.15
.3.49.2.3
This trap is sent when the index number of
image which is loaded when the Switch
starts up is different from what is specified
through the CLI.
RebootEvent 1.3.6.1.4.1.890.1.5.
1.1.2
This trap is sent when the Switch reboots by
an administrator through a management
interface.
timesync zyDateTimeTrapTimeServerNot
Reachable
1.3.6.1.4.1.890.1.15
.3.82.3.1
This trap is sent when the Switch’s date and
time is not manually entered or the specified
time server is not reachable.
zyDateTimeTrapTimeServerNot
ReachableRecovered
1.3.6.1.4.1.890.1.15
.3.82.3.2
This trap is sent when the Switch’s real time
clock is up to date.
loopguard zyLoopGuardLoopDetect 1.3.6.1.4.1.890.1.15
.3.45.2.1
This trap is sent when loopguard shuts down
a port.
errdisable zyErrdisableDetect 1.3.6.1.4.1.890.1.15
.3.24.4.1
This trap is sent when an error is detected on
a port, such as a loop occurs or the rate limit
for specific control packets is exceeded.
zyErrdisableRecovery 1.3.6.1.4.1.890.1.15
.3.24.4.2
This trap is sent when the Switch ceases the
action taken on a port, such as shutting
down the port or discarding packets on the
port, after the specified recovery interval.