Chapter 26 SNMP
XMG1930 Series User’s Guide
200
poe
(For PoE models
only)
pethPsePortOnOffNotification 1.3.6.1.2.1.105.0.1 This trap is sent when the PoE port delivers
power or delivers no power to a PD.
pethMainPowerUsageOnNo
tification
1.3.6.1.2.1.105.0.2 This trap is sent when the usage power is
above the usage indication threshold.
pethMainPowerUsageOffNo
tification
1.3.6.1.2.1.105.0.3 This trap is sent when the usage power is
below the usage indication threshold.
zyPoePowerPortOverload 1.3.6.1.4.1.890.1.15
.3.59.4.1
This trap is sent when the port is turned off to
supply power due to overloading.
zyPoePowerPortShortCircuit 1.3.6.1.4.1.890.1.15
.3.59.4.2
This trap is sent when the port is turned off to
supply power due to short circuit.
zyPoePowerPortOverSystemBu
dget
1.3.6.1.4.1.890.1.15
.3.59.4.3
This trap is sent when the port is turned off to
supply power because the requested power
exceeds the total PoE power budget on the
Switch.
zyPoePowerPortOverloadReco
vered
1.3.6.1.4.1.890.1.15
.3.59.4.5
This trap is sent when the port is turned on to
recover from an overloaded state.
zyPoePowerPortShortCircuitRe
covered
1.3.6.1.4.1.890.1.15
.3.59.4.6
This trap is sent when the port is turned on to
recover from a short circuit.
zyPoePowerPortOverSystemBu
dgetRecovered
1.3.6.1.4.1.890.1.15
.3.59.4.7
This trap is sent when the port is turned on to
recover from an over system budget.
loginrecord zyAccessControlLoginRecord 1.3.6.1.4.1.890.1.15
.3.9.4.1
This trap is sent when users log in.
zyAccessControlLogoutRecord 1.3.6.1.4.1.890.1.15
.3.9.4.2
This trap is sent when users log out.
zyAccessControlLoginFail 1.3.6.1.4.1.890.1.15
.3.9.4.3
This trap is sent when users fail in login.
Table 88 SNMP Interface Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
linkup linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
linkdown linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is
down.
autonegotiatio
n
zyPortAutonegotiationFailed 1.3.6.1.4.1.890.1.15.
3.61.3.1
This trap is sent when an Ethernet interface
fails to auto-negotiate with the peer
Ethernet interface.
zyPortAutonegotiationFailedRe
covered
1.3.6.1.4.1.890.1.15.
3.61.3.3
This trap is sent when the Ethernet interface
auto-negotiation link speed and duplex
mode have recovered.
lldp lldpRemTablesChange 1.0.8802.1.1.2.0.0.1 The trap is sent when entries in the remote
database have any updates.
Link Layer Discovery Protocol (LLDP), defined
as IEEE 802.1ab, enables LAN devices that
support LLDP to exchange their configured
settings. This helps eliminate configuration
mismatch issues.
Table 87 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
To Next Page
Loading...
