Chapter 26 SNMP
XMG1930 Series User’s Guide
201
transceiver-
ddm
zyTransceiverDdmiTemperatur
eOutOfRange
1.3.6.1.4.1.890.1.15.
3.84.3.1
This trap is sent when the transceiver
temperature is above or below the normal
operating range.
zyTransceiverDdmiTxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.2
This trap is sent when the transmitted optical
power is above or below the normal
operating range.
zyTransceiverDdmiRxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.3
This trap is sent when the received optical
power is above or below the normal
operating range.
zyTransceiverDdmiVoltageOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.4
This trap is sent when the transceiver supply
voltage is above or below the normal
operating range.
zyTransceiverDdmiTxBiasOutOf
Range
1.3.6.1.4.1.890.1.15.
3.84.3.5
This trap is sent when the transmitter laser
bias current is above or below the normal
operating range.
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.6
This trap is sent when the transceiver
temperature is recovered from the out of
normal operating range.
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.7
This trap is sent when the transmitted optical
power is recovered from the out of normal
operating range.
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.8
This trap is sent when the received optical
power is recovered from the out of normal
operating range.
zyTransceiverDdmiVoltageOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.9
This trap is sent when the transceiver supply
voltage is recovered from the out of normal
operating range.
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.10
This trap is sent when the transmitter laser
bias current is recovered from the out of
normal operating range.
Storm-control zyPortStormControlTrap 1.3.6.1.4.1.890.1.15.
3.78.2.1
This trap is sent when storm control is
detected on a specific port. A packet filter
action has been applied on the interface.
zuld zyZuldUnidirectionalDetected 1.3.6.1.4.1.890.1.15.
3.110.3.1
This trap is sent when a unidirectional link is
detected.
zyZuldBidirectionalRecovered 1.3.6.1.4.1.890.1.15.
3.110.3.2
This trap is sent when the port which is shut
down by ZULD becomes active again.
flex-link zyFlexLinkPortStateChange 1.3.6.1.4.1.890.1.15.
3.124.4.1
This trap is sent when the port state of a flex
link pair changes.
Table 88 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
To Next Page
Loading...
