EasyManua.ls Logo

ZyXEL Communications ZYWALL 35 - Configure Zero Configuration Mode on Zywall B; Figure 45 Tutorial: VPN Summary Screens Comparison Example

ZyXEL Communications ZYWALL 35
872 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Tutorials
ZyWALL 5/35/70 Series User’s Guide
116
Figure 45 Tutorial: VPN Summary Screens Comparison Example
You have configured the company’s ZyWALL (A) and the telecommuters ZyWALL (B).
4.1.3 Configure Zero Configuration Mode on ZyWALL B
The ZyWALL P1’s zero configuration mode provides a simplified user mode for the web
configurator interface. The user uses this interface to configure the ZyWALL’s Internet access
settings and log into the VPN tunnel (see Section 4.1.4 on page 117). Do the following to have
the telecommuters ZyWALL (B) use zero configuration mode.
1 Log into ZyWALL B’s web configurator.
2 Go to MAINTENANCE and click the Device Mode tab.
Company Device (A)
Telecommuter Device (B)

Table of Contents

Other manuals for ZyXEL Communications ZYWALL 35

Related product manuals