ZyXEL Communications ZYWALL 35 - Restore Configuration; Figure 459 System Maintenance: Backup Configuration; Figure 460 System Maintenance: Starting Xmodem Download Screen; Figure 461 Backup Configuration Example

Chapter 48 Firmware and Configuration File Maintenance
ZyWALL 5/35/70 Series User’s Guide
720
Figure 459 System Maintenance: Backup Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 460 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in
the following screen.
Figure 461 Backup Configuration Example
Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.
4 After a successful backup you will see the following screen. Press any key to return to
the SMT menu.
Figure 462 Successful Backup Confirmation Screen
48.4 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this
function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any
time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###