ZyWALL 5/35/70 Series User’s Guide
735
CHAPTER 50
Remote Management
This chapter covers remote management found in SMT menu 24.11.
50.1 Remote Management
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
" When you configure remote management to allow management from any
network except the LAN, you still need to configure a firewall rule to allow
access. See Chapter 11 on page 243 for details on configuring firewall rules.
You can also disable a service on the ZyWALL by not allowing access for the service/protocol
through any of the ZyWALL interfaces.
To disable remote management of a service, select Disable in the corresponding Access field.
Enter 11 from menu 24 to bring up Menu 24.11 - Remote Management Control.
To Next Page
Loading...
