ZyWALL 5/35/70 Series User’s Guide
639
CHAPTER 39
Route Setup
This chapter describes how to configure the ZyWALL's traffic redirect.
39.1 Configuring Route Setup
From the main menu, enter 6 to open Menu 6 - Route Setup.
Figure 386 Menu 6: Route Setup
39.2 Route Assessment
This menu allows you to configure traffic redirect properties.
Figure 387 Menu 6.1: Route Assessment
Menu 6 - Route Setup
1. Route Assessment
2. Traffic Redirect
3. Route Failover
Enter Menu Selection Number:
Menu 6.1 - Route Assessment
Probing WAN 1 Check Point= Yes
Use Default Gateway as Check Point= Yes
Check Point= N/A
Probing WAN 2 Check Point= Yes
Use Default Gateway as Check Point= Yes
Check Point= N/A
Probing Traffic Redirection Check Point= No
Use Default Gateway as Check Point= N/A
Check Point= N/A
Press ENTER to Confirm or ESC to Cancel:
To Next Page
Loading...
