Chapter 33 Introducing the SMT
ZyWALL 5/35/70 Series User’s Guide
601
Figure 358 Menu 23: System Password
2 Type your existing password and press [ENTER].
3 Type your new system password and press [ENTER].
4 Re-type your new system password for confirmation and press [ENTER].
Note that as you type a password, the screen displays an “x” for each character you type.
33.5 Resetting the ZyWALL
See Section 2.3 on page 63 for directions on resetting the ZyWALL.
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
To Next Page
Loading...
