Chapter 8 WAN Screens
ZyWALL 5/35/70 Series User’s Guide
187
Figure 99 NETWORK > WAN > WAN (PPTP Encapsulation)
The following table describes the labels in this screen.
Table 43 NETWORK > WAN > WAN (PPTP Encapsulation)
LABEL DESCRIPTION
ISP Parameters
for Internet Access
Encapsulation Set the encapsulation method to PPTP. The ZyWALL supports only one PPTP
server connection at any given time. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype to Confirm Type your password again to make sure that you have entered it correctly.
To Next Page
Loading...
