Chapter 51 IP Policy Routing
ZyWALL 5/35/70 Series User’s Guide
743
Figure 485 Menu 25.1.1: IP Routing Policy Setup
The following table describes the fields in this screen.
51.3 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
Menu 25.1.1 - IP Routing Policy Setup
Apply policy to packets received from:
LAN= No
DMZ= No
WLAN= No
ALL WAN= Yes
Selected Remote Node index= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 266 Menu 25.1.1: IP Routing Policy Setup
FIELD DESCRIPTION
LAN/DMZ/WLAN/
ALL WAN
Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to
apply the policy to packets received on the specific interface(s).
Selected Remote
Node index
If you select No in the ALL WAN field, enter the number of the WAN interface.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm…" to
save your configuration, or press [ESC] at any time to cancel.
To Next Page
Loading...
