ZyXEL Communications ZYWALL 35 - IP Static Route Setup; Chapter 42 IP Static Route Setup

ZyWALL 5/35/70 Series User’s Guide
659
CHAPTER 42
IP Static Route Setup
This chapter shows you how to configure static routes with your ZyWALL.
42.1 IP Static Route Setup
Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
" The first two static route entries are for default WAN1 and WAN2 routes on a
ZyWALL with multiple WAN interfaces. You cannot modify or delete a static
default route.
The default route is disabled after you change the static WAN IP address to a
dynamic WAN IP address.
" The “-” before a route name indicates the static route is inactive.