ZyXEL Communications ZYWALL 35 - IP Static Route; Figure 259 ADVANCED > STATIC ROUTE > IP Static Route

Chapter 22 Static Route
ZyWALL 5/35/70 Series User’s Guide
450
22.2 IP Static Route
Click ADVANCED > STATIC ROUTE to open the IP Static Route screen (some of the
screen’s blank rows are not shown).
The first two static route entries are for default WAN 1 and WAN 2 routes on a ZyWALL with
multiple WAN interfaces. You cannot modify or delete a static default route.
The default route is disabled after you change the static WAN IP address to a dynamic WAN
IP address.
Figure 259 ADVANCED > STATIC ROUTE > IP Static Route