Chapter 8 WAN Screens
ZyWALL 5/35/70 Series User’s Guide
194
8.14 Traffic Redirect
Traffic redirect forwards WAN traffic to a backup gateway when the ZyWALL cannot
connect to the Internet through its normal gateway. Connect the backup gateway on the WAN
so that the ZyWALL still provides firewall protection for the LAN.
Data Budget Select this check box and specify how much downstream and/or upstream data (in
Mega bytes) can be transmitted via the 3G connection within one month.
Select Download to set a limit on the downstream traffic (from the ISP to the
ZyWALL).
Select Upload to set a limit on the upstream traffic (from the ZyWALL to the ISP).
Select Download/Upload to set a limit on the total traffic in both directions.
If you change the value after you configure and enable budget control, the ZyWALL
resets the statistics.
Reset time and
data budget
counters on
Select the date on which the ZyWALL resets the budget every month. If the date
you selected is not available in a month, such as 30th or 31th, the ZyWALL resets
the budget on the last day of the month.
Reset time and
data budget
counters
This button is available only when you enable budget control in this screen.
Click this button to reset the time and data budgets immediately. The count starts
over with the 3G connection’s full configured monthly time and data budgets. This
does not affect the normal monthly budget restart.
Actions when
over budget
Specify the actions the ZyWALL takes when the time or data limit is exceeded.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
connections.
Select Keep to maintain the existing 3G connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the ZyWALL allows you to transmit data using
the current connection, but you cannot build a new connection if the existing
connection is disconnected.
Actions when
over % of time
budget or % of
data budget
Specify the actions the ZyWALL takes when the specified percentage of time
budget or data limit is exceeded. Enter a number from 1 to 99 in the percentage
fields. If you change the value after you configure and enable budget control, the
ZyWALL resets the statistics.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 45 NETWORK > WAN > 3G (WAN 2) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
