Chapter 35 WAN and Dial Backup Setup
ZyWALL 5/35/70 Series User’s Guide
619
35.3.7 3G Modem Setup
From the main menu, enter 2 to open menu 2 on the ZyWALL that supports a 3G card.
" It is not necessary to configure menu 2 with a Sierra Wireless AC595 3G card.
Figure 371 3G Modem Setup in WAN Setup (ZyWALL 5)
The following table describes the fields in this screen.
Menu 2 - WAN Setup
WAN 1 MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
3G Modem Setup:
Init= Configure APN
APN =internet
PIN code= 0000
Press ENTER to Confirm or ESC to Cancel:
Table 222 3G Modem Setup in WAN Setup (ZyWALL 5)
FIELD DESCRIPTION
3G Modem
Setup
Init Press [SPACE BAR] and then [ENTER] to select Configure directly if your ISP
provides the initial string or you know how to configure it. Only use this option with a
GSM 3G card.
Select Configure APN if your ISP gave you an APN (Access Point Name) to use.
Init This field displays when you select Configure directly in the previous field. Enter
the string. It can be up to 72 ASCII printable characters.
APN This field displays when you select Configure APN in the Init field. Enter the APN
(Access Point Name) provided by your service provider. Connections with different
APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 31 ASCII printable characters. Spaces are allowed.
To Next Page
Loading...
