Chapter 30 Reports
ZyWALL 5/35/70 Series User’s Guide
540
30.2.4 System Reports Specifications
The following table lists detailed specifications on the reports feature.
30.3 IDP Threat Reports Screen
Click REPORTS > THREAT REPORTS to display the Threat Reports IDP screen. This
screen displays IDP (Intrusion Detection and Prevention) statistics.
Figure 322 REPORTS > THREAT REPORTS > IDP
Table 166 Report Specifications
LABEL DESCRIPTION
Number of web
sites/protocols
or ports/IP
addresses
listed:
20
Hit count limit: Up to 2
32
hits can be counted per web site. The count starts over at 0 if it passes
four billion.
Bytes count
limit:
Up to 2
64
bytes can be counted per protocol/port or LAN IP address. The count
starts over at 0 if it passes 2
64
bytes.