ZyXEL Communications ZYWALL 35 - Resetting the Time; Time Server Synchronization; Figure 338 Synchronization in Process; Figure 339 Synchronization Is Successful

Chapter 32 Maintenance
ZyWALL 5/35/70 Series User’s Guide
580
32.5.1 Resetting the Time
The ZyWALL resets the time in the following instances:
• When you click
Synchronize Now.
• On saving your changes.
• When the ZyWALL starts up.
• 24-hour intervals after starting.
32.5.2 Time Server Synchronization
Click the Synchronize Now button to get the time and date from the predefined time server or
the time server you specified in the Time Server Address field.
When the System Time and Date Synchronization in Process screen appears, wait up to one
minute.
Figure 338 Synchronization in Process
Click the Return button to go back to the Time and Date screen after the time and date is
updated successfully.
Figure 339 Synchronization is Successful
If the update was not successful, the following screen appears. Click Return to go back to the
Time and Date screen.