Chapter 28 Custom Application
ZyWALL 5/35/70 Series User’s Guide
526
Figure 312 ADVANCED > Custom APP
The following table describes the labels in this screen.
Table 160 ADVANCED > Custom APP
LABEL DESCRIPTION
Application Select the application for which you want the ZyWALL to monitor specific ports. You
can use the same application in more than one entry. To remove an entry, select
Select a Type.
Description Enter information about the reason for monitoring custom port numbers for this
protocol.
Start Port Enter the starting port for the range that the ZyWALL is to monitor for this
application. If you are only entering a single port number, enter it here.
End Port Enter the ending port for the range that the ZyWALL is to monitor for this application.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
