Chapter 6 Monitor
USG20(W)-VPN Series User’s Guide
104
The following table describes the labels in this screen.
6.3 Interface Status Screen
This screen lists all of the USG’s interfaces and gives packet statistics for them. Click Monitor >
System Status > Interface Status to access this screen.
Figure 89 Monitor > System Status > Interface Status
Table 33 Monitor > System Status > Port Statistics > Switch to Graphic View
LABEL DESCRIPTION
Refresh Interval Enter how often you want this window to be automatically updated.
Refresh Now Click this to update the information in the window right away.
Port Selection Select the number of the physical port for which you want to display graphics.
Switch to Grid
View
Click this to display the port statistics as a table.
bps The y-axis represents the speed of transmission or reception.
time The x-axis shows the time period over which the transmission or reception occurred
TX This line represents traffic transmitted from the USG on the physical port since it was last
connected.
RX This line represents the traffic received by the USG on the physical port since it was last
connected.
Last Update This field displays the date and time the information in the window was last updated.
System Up Time This field displays how long the USG has been running since it last restarted or was turned
on.
To Next Page
Loading...
