Chapter 6 Monitor
USG20(W)-VPN Series User’s Guide
125
Figure 105 Monitor > VPN Monitor > SSL
The following table describes the labels in this screen.
6.17 The L2TP over IPSec Session Monitor Screen
Click Monitor > VPN Monitor > L2TP over IPSec to open the following screen. Use this screen
to display and manage the USG’s connected L2TP VPN sessions.
Figure 106 Monitor > VPN Monitor > L2TP over IPSec
The following table describes the fields in this screen.
Table 51 Monitor > VPN Monitor > SSL
LABEL DESCRIPTION
Disconnect Select a connection and click this button to terminate the user’s connection and delete
corresponding session information from the USG.
Refresh Click Refresh to update this screen.
# This field is a sequential value, and it is not associated with a specific SSL.
User This field displays the account user name used to establish this SSL VPN connection.
Access This field displays the name of the SSL VPN application the user is accessing.
Login Address This field displays the IP address the user used to establish this SSL VPN connection.
Connected Time This field displays the time this connection was established.
Inbound (Bytes) This field displays the number of bytes received by the USG on this connection.
Outbound (Bytes) This field displays the number of bytes transmitted by the USG on this connection.
Table 52 Monitor > VPN Monitor > L2TP over IPSec
LABEL DESCRIPTION
Disconnect Select a connection and click this button to disconnect it.
Refresh Click Refresh to update this screen.
# This field is a sequential value, and it is not associated with a specific L2TP VPN session.
User Name This field displays the remote user’s user name.
To Next Page
Loading...
