EasyManua.ls Logo

ZyXEL Communications ZyWall USG20-VPN - The Session Control Add;Edit Screen

ZyXEL Communications ZyWall USG20-VPN
683 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 20 Security Policy
USG20(W)-VPN Series User’s Guide
329
20.5.1 The Session Control Add/Edit Screen
Click Configuration > Security Policy > Session Control and the Add or Edit icon to display
the Add or Edit screen. Use this screen to configure rules that define a session limit for specific
users or addresses.
Figure 218 Configuration > Security Policy > Session Control > Edit
The following table describes the labels in this screen.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To change a rules position in the numbered list, select the rule and click Move to display a
field to type a number for where you want to put that rule and press [ENTER] to move the
rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
# This is the index number of a session limit rule. It is not associated with a specific rule.
User This is the user name or user group name to which this session limit rule applies.
IPv4 / IPv6
Address
This is the IPv4 / IPv6 address object to which this session limit rule applies.
Description This is the information configured to help you identify the rule.
Limit This is how many concurrent sessions this user or address is allowed to have.
Apply Click Apply to save your changes back to the USG.
Reset Click Reset to return the screen to its last-saved settings.
Table 128 Configuration > Security Policy > Session Control (continued)
LABEL DESCRIPTION
Table 129 Configuration > Security Policy > Session Control > Add / Edit
LABEL DESCRIPTION
Create new
Object
Use to configure new settings for User or Address objects that you need to use in this
screen.Click on the down arrow to see the menu.
Enable Rule Select this check box to turn on this session limit rule.
Description Enter information to help you identify this rule. Use up to 60 printable ASCII characters.
Spaces are allowed.

Table of Contents

Related product manuals