ZyXEL Communications ZyWall USG20-VPN - Isp Account Edit

Chapter 29 Object
USG20(W)-VPN Series User’s Guide
530
Figure 360 Configuration > Object > ISP Account
The following table describes the labels in this screen. See the ISP Account Edit section below for
more information as well.
29.11.1.1 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See Section 29.11.1
on page 529.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 361 Configuration > Object > ISP Account > Edit
Table 225 Configuration > Object > ISP Account
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific entry.
Profile Name This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
Protocol This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name This field displays the user name of the ISP account.