Chapter 29 Object
USG20(W)-VPN Series User’s Guide
468
29.2.5.1 MAC Address Add/Edit Screen
This screen allows you to create a new allowed device or edit an existing one. To access this screen,
go to the MAC Address screen (see Section 29.2.5 on page 467), and click either the Add icon or
an Edit icon.
Figure 315 Configuration > Object > User/Group > MAC Address > Add
The following table describes the labels in this screen.
29.2.6 User /Group Technical Reference
This section provides some information on users who use an external authentication server in order
to log in.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
MAC Address/
OUI
This field displays the MAC address or OUI (Organizationally Unique Identifier of computer
hardware manufacturers) of wireless clients using MAC authentication with the USG local
user database.
Description This field displays a description of the device identified by the MAC address or OUI.
Table 186 Configuration > Object > User/Group > MAC Address (continued)
LABEL DESCRIPTION
Table 187 Configuration > Object > User/Group > MAC Address > Add
LABEL DESCRIPTION
MAC Address/
OUI
Type the MAC address (six hexadecimal number pairs separated by colons or hyphens) or
OUI (three hexadecimal number pairs separated by colons or hyphens) to identify specific
wireless clients for MAC authentication using the USG local user database. The OUI is the
first three octets in a MAC address and uniquely identifies the manufacturer of a network
device.
Description Enter an optional description of the wireless device(s) identified by the MAC or OUI. You
can use up to 60 characters, punctuation marks, and spaces.
OK Click OK to save your changes back to the USG.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
