Chapter 29 Object
USG20(W)-VPN Series User’s Guide
461
29.2.3 User/Group Group Summary Screen
User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen allows
you to add, edit, and remove user groups. To access this screen, login to the Web Configurator, and
click Configuration > Object > User/Group > Group.
Figure 309 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See Section 29.2.3.1 on page 461 for more
information as well.
29.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see Section 29.2.3 on page 461), and click either the
Add icon or an Edit icon.
OK Click OK to save your changes back to the USG.
Cancel Click Cancel to exit this screen without saving your changes.
Table 180 Configuration > Object > User/Group > User > Add (continued)
LABEL DESCRIPTION
Table 181 Configuration > Object > User/Group > Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so. Removing a group does not remove the user accounts in the group.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific user group.
Group Name This field displays the name of each user group.
Description This field displays the description for each user group.
Member This field lists the members in the user group. Each member is separated by a comma.
Reference This displays the number of times an object reference is used in a profile.
To Next Page
Loading...
