Chapter 3 Hardware, Interfaces and Zones
USG20(W)-VPN Series User’s Guide
46
3.1.2 Rear Panels
The connection ports are located on the rear panel.
Figure 33 USG20-VPN Rear Panel
Figure 34 USG20W-VPN Rear Panel
The following table describes the items on the rear panel
WLAN Green Off The built-in wireless LAN card is not ready or has failed.
On The built-in wireless LAN card is ready.
Blinking The built-in wireless LAN card is sending or receiving packets.
P1, P2... Green Off There is no traffic on this port.
On This port has a successful 10/100 Mbps connection.
Blinking The USG is sending or receiving packets on this port with a 10/100 Mbps
connection.
Yellow Off There is no connection on this port.
On This port has a successful 1000 Mbps connection.
Blinking The device is sending or receiving packets on this port with a 1000 Mbps
connection.
Table 10 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
Table 11 Rear Panel Items
LABEL DESCRIPTION
Power Use the included power cord to connect the power socket to a power outlet. Turn the power
switch on if your USG has a power switch.
To Next Page
Loading...
