ZyXEL Communications ZyWall USG20-VPN - Example: Configure USG for Secuextender

Chapter 22 SSL VPN
USG20(W)-VPN Series User’s Guide
376
The following table describes the labels in this screen.
22.4.1 Example: Configure USG for SecuExtender
Make these configurations on the USG to allow the remote user to access resources behind the USG
using SecuExtender. These steps can be performed in any order.
1 Create a user that can log into the USG. Using the USG web configurator, go to Configuration >
Object > User > Add and substitute your information for the information shown in the following
example.
Figure 246 Create a User
2 Next create an SSL VPN Access Privilege policy substituting your information for the information
shown in the following example. Using the USG web configurator, go to Configuration > VPN >
SSL VPN > Access Privilege > Add.
Table 147 Configuration > VPN > SSL VPN > SecuExtender
LABEL DESCRIPTION
Latest Version This displays the latest version of the USG Security SecuExtender that is
available.
Current Version This displays the current version of SecuExtender that is installed in the USG.
Note: You need to register first at portal.myzyxel.com to download the latest version of
SecuExtender.
Update Now The USG periodically checks if there’s a later version of SecuExtender at the
portal. The Update Now button is enabled when thre is.Click Update Now to
get the latest version of SecuExtender.