ZyXEL Communications ZyWall USG20-VPN - View Log

Chapter 24 USG SecuExtender (Windows)
USG20(W)-VPN Series User’s Guide
393
Figure 272 USG SecuExtender Status
The following table describes the labels in this screen.
24.3 View Log
If you have problems with the USG SecuExtender, customer support may request you to provide
information from the log. Right-click the USG SecuExtender icon in the system tray and select Log
to open a notepad file of the USG SecuExtender’s log.
Table 149 USG SecuExtender Status
LABEL DESCRIPTION
Connection Status
SecuExtender IP
Address
This is the IP address the USG assigned to this remote user computer for an SSL VPN
connection.
DNS Server 1/2 These are the IP addresses of the DNS server and backup DNS server for the SSL VPN
connection.
DNS (Domain Name System) maps a domain name to its corresponding IP address and
vice versa. The DNS server is extremely important because without it, you must know
the IP address of a computer before you can access it. Your computer uses the DNS
server specified here to resolve domain names for resources you access through the SSL
VPN connection.
WINS Server 1/2 These are the IP addresses of the WINS (Windows Internet Naming Service) and backup
WINS servers for the SSL VPN connection. The WINS server keeps a mapping table of
the computer names on your network and the IP addresses that they are currently using.
Network 1~8 These are the networks (including netmask) that you can access through the SSL VPN
connection.
Activity
Connected Time This is how long the computer has been connected to the SSL VPN tunnel.
Transmitted This is how many bytes and packets the computer has sent through the SSL VPN
connection.
Received This is how many bytes and packets the computer has received through the SSL VPN
connection.