Chapter 30 System
USG20(W)-VPN Series User’s Guide
560
30.7.6 Customizing the WWW Login Page
Click Configuration > System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize the page that
displays after an access user logs into the Web Configurator to access network services like the
Internet.
Figure 382 Configuration > System > WWW > Login Page
Zone Select ALL to allow or prevent any USG zones from being accessed using this service.
Select a predefined USG zone on which a incoming service is allowed or denied.
Action Select Accept to allow the user to access the USG from the specified computers.
Select Deny to block the user’s access to the USG from the specified computers.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving
Table 242 Configuration > System > Service Control Rule > Edit
LABEL DESCRIPTION
To Next Page
Loading...
