Chapter 29 Object
USG20(W)-VPN Series User’s Guide
498
schedules always begin and end in the same day. Recurring schedules are useful for defining the
workday and off-work hours.
29.7.2 The Schedule Summary Screen
The Schedule summary screen provides a summary of all schedules in the USG. To access this
screen, click Configuration > Object > Schedule.
Figure 336 Configuration > Object > Schedule
The following table describes the labels in this screen. See Section 29.7.2.1 on page 499 and
Section 29.7.2.2 on page 500 for more information as well.
Table 207 Configuration > Object > Schedule
LABEL DESCRIPTION
One Time
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule, which is used to refer to the schedule.
Start Day /
Time
This field displays the date and time at which the schedule begins.
Stop Day /
Time
This field displays the date and time at which the schedule ends.
Reference This displays the number of times an object reference is used in a profile.
Recurring
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule, which is used to refer to the schedule.
To Next Page
Loading...
