ZyXEL Communications ZyWall USG20-VPN - Page 499

Chapter 29 Object
USG20(W)-VPN Series User’s Guide
499
29.7.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see Section 29.7.2 on page 498),
and click either the Add icon or an Edit icon in the One Time section.
Figure 337 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Start Time This field displays the time at which the schedule begins.
Stop Time This field displays the time at which the schedule ends.
Reference This displays the number of times an object reference is used in a profile.
Table 207 Configuration > Object > Schedule (continued)
LABEL DESCRIPTION
Table 208 Configuration > Object > Schedule > Edit (One Time)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number.
This value is case-sensitive.
Date Time
StartDate Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StartTime Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
StopDate Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StopTime Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59