Chapter 33 Diagnostics
USG20(W)-VPN Series User’s Guide
624
Figure 444 Maintenance > Diagnostics > Network Tool
The following table describes the labels in this screen.
33.7 The Wireless Frame Capture Screen
Use this screen to capture wireless network traffic going through the AP interfaces connected to
your USG. Studying these frame captures may help you identify network problems.
Click Maintenance > Diagnostics > Wireless Frame Capture to display this screen.
Table 274 Maintenance > Diagnostics > Network Tool
LABEL DESCRIPTION
Network Tool Select PING IPv4 to ping the IP address that you entered.
Select TRACEROUTE IPv4 to perform the traceroute function. This determines the
path a packet takes to the specified computer.
Domain Name or IP
Address
Type the IPv4 address of a computer that you want to perform ping or traceroute in
order to test a connection.
Test Click this button to start to ping or run a traceroute.
Stop Click this button to terminate the current ping operation or traceroute.
Reset Click this button to return the screen to its last-saved settings.
To Next Page
Loading...
