Chapter 33 Diagnostics
USG20(W)-VPN Series User’s Guide
625
Note: New capture files overwrite existing files of the same name. Change the File Prefix
field’s setting to avoid this.
Figure 445 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 275 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL DESCRIPTION
MON Mode APs
Configure AP to
MON Mode
Click this to go the Configuration > Wireless > AP Management screen, where
you can set one or more APs to monitor mode.
Available MON
Mode APs
This column displays which APs on your wireless network are currently configured
for monitor mode.
Use the arrow buttons to move APs off this list and onto the Captured MON Mode
APs list.
Capture MON Mode
APs
This column displays the monitor-mode configured APs selected to for wireless
frame capture.
Misc Setting
File Size Specify a maximum size limit in kilobytes for the total combined size of all the
capture files on the USG, including any existing capture files and any new capture
files you generate.
Note: If you have existing capture files you may need to set this size larger or delete
existing capture files.
The valid range is 1 to 50000. The USG stops the capture and generates the capture
file when either the file reaches this size.
To Next Page
Loading...
