ZyXEL Communications ZyWall USG20-VPN - VPN Settings for L2 TP VPN Setting Wizard - Summary

Chapter 4 Quick Setup Wizards
USG20(W)-VPN Series User’s Guide
81
Note: DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it,
you must know the IP address of a computer before you can access it. The USG
uses a system DNS server (in the order you specify here) to resolve domain names
for VPN, DDNS and the time server.
4.5.3 VPN Settings for L2TP VPN Setting Wizard - Summary
This is a read-only summary of the L2TP VPN settings.
Figure 69 VPN Settings for L2TP VPN Settings Advanced Settings Wizard: Summary
Summary
• Rule Name: Identifies the L2TP VPN connection (and the L2TP VPN gateway).
• Secure Gateway: “Any” displays in this field because it is not configurable in this wizard. It
allows incoming connections from the L2TP VPN Client.
• Pre-Shared Key: L2TP VPN tunnel password.
• My Address (Interface): This displays the interface to use on your USG for the L2TP tunnel.
• IP Address Pool: This displays the IP address pool used to assign to the L2TP VPN clients.
Click Save to complete the L2TP VPN Setting and the following screen will show.