ZyXEL Communications ZyWall USG20-VPN - User;Group User Summary Screen

Chapter 29 Object
USG20(W)-VPN Series User’s Guide
458
29.2.2 User/Group User Summary Screen
The User screen provides a summary of all user accounts. To access this screen, login to the Web
Configurator, and click Configuration > Object > User/Group.
Figure 307 Configuration > Object > User/Group > User
The following table describes the labels in this screen.
29.2.2.1 User Add/Edit Screen
The User Add/Edit screen allows you to create a new user account or edit an existing one.
29.2.2.2 Rules for User Names
Enter a user name from 1 to 31 characters.
Table 179 Configuration > Object > User/Group > User
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific user.
User Name This field displays the user name of each user.
User Type This field displays the types of user accounts the USG uses:
• admin - this user can look at and change the configuration of the USG
• limited-admin - this user can look at the configuration of the USG but not to change it
• user - this user has access to the USG’s services and can also browse user-mode
commands (CLI).
• guest - this user has access to the USG’s services but cannot look at the configuration
• ext-user - this user account is maintained in a remote server, such as RADIUS or
LDAP. See Ext-User Accounts on page 456 for more information about this type.
• ext-group-user - this user account is maintained in a remote server, such as RADIUS
or LDAP. See Ext-Group-User Accounts on page 457 for more information about this
type.
Description This field displays the description for each user.
Reference This displays the number of times an object reference is used in a profile.