ZyXEL Communications ZyWall USG20-VPN - AP Profile Overview

Chapter 29 Object
USG20(W)-VPN Series User’s Guide
469
Setting up User Attributes in an External Server
To set up user attributes, such as reauthentication time, in LDAP or RADIUS servers, use the
following keywords in the user configuration file.
The following examples show you how you might set up user attributes in LDAP and RADIUS
servers.
Creating a Large Number of Ext-User Accounts
If you plan to create a large number of Ext-User accounts, you might use CLI commands, instead
of the Web Configurator, to create the accounts. Extract the user names from the LDAP or RADIUS
server, and create a shell script that creates the user accounts.
29.3 AP Profile Overview
This section shows you how to configure preset profiles for the Access Points (APs) connected to
your USG’s wireless network.
•The Radio screen (Section 29.3.1 on page 470) creates radio configurations that can be used by
the APs.
•The SSID screen (Section 29.3.2 on page 476) configures three different types of profiles for
your networked APs.
29.3.0.1 What You Need To Know
The following terms and concepts may help as you read this section.
Wireless Profiles
At the heart of all wireless AP configurations on the USG are profiles. A profile represents a group of
saved settings that you can use across any number of connected APs. You can set up the following
wireless profile types:
Table 188 LDAP/RADIUS: Keywords for User Attributes
KEYWORD CORRESPONDING ATTRIBUTE IN WEB CONFIGURATOR
type User Type. Possible Values: admin, limited-admin, user, guest.
leaseTime Lease Time. Possible Values: 1-1440 (minutes).
reauthTime Reauthentication Time. Possible Values: 1-1440 (minutes).
Figure 316 LDAP Example: Keywords for User Attributes
type: admin
leaseTime: 99
reauthTime: 199
Figure 317 RADIUS Example: Keywords for User Attributes
type=user;leaseTime=222;reauthTime=222