EasyManua.ls Logo

ZyXEL Communications ZyWall USG20-VPN - The Inbound LB Member Add;Edit Screen

ZyXEL Communications ZyWall USG20-VPN
683 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 18 Inbound Load Balancing
USG20(W)-VPN Series User’s Guide
296
18.2.2 The Inbound LB Member Add/Edit Screen
The Add Load Balancing Member screen allows you to add a member interface for the DNS load
balancing rule. Click Configuration > Network > Inbound LB > Add or Edit and then an Add or
Edit icon to open this screen.
Figure 203 Configuration > Network > Inbound LB > Add/Edit > Add
The following table describes the labels in this screen.
Remove To remove an entry, select it and click Remove. The USG confirms you want to
remove it before doing so.
# This field displays the order in which the USG checks this rule’s member interfaces.
IP Address This field displays the IP address of the member interface.
Monitor Interface This field displays the name of the member interface. The USG manages load
balancing between the member interfaces.
Weight This field is available if you selected Weighted Round Robin as the load balancing
algorithm. This field displays the weight of the member interface. An interface with a
larger weight gets more chances to transmit traffic than an interface with a smaller
weight.
OK Click OK to save your changes back to the USG.
Cancel Click Cancel to exit this screen without saving.
Table 118 Configuration > Network > Inbound LB > Add/Edit (continued)
LABEL DESCRIPTION
Table 119 Configuration > Network > Inbound LB > Add/Edit > Add/Edit
LABEL DESCRIPTION
Member The USG checks each member interface’s loading in the order displayed here.
Monitor Interface Select an interface to associate it with the DNS load balancing rule. This field also
displays whether the IP address is a static IP address (Static), dynamically assigned
(Dynamic) or obtained from a DHCP server (DHCP Client), as well as the IP address
and subnet mask.
Weight This field is available if you selected Weighted Round Robin for the load balancing
algorithm.
Specify the weight of the member interface. An interface with a larger weight gets
more chances to transmit traffic than an interface with a smaller weight.
IP Address

Table of Contents

Related product manuals