Chapter 17 Layer 2 Isolation
USG20(W)-VPN Series User’s Guide
291
Figure 199 Configuration > Network > Layer 2 Isolation > White List > Add/Edit
The following table describes the labels in this screen.
Table 116 Configuration > Network > Layer 2 Isolation > White List > Add/Edit
LABEL DESCRIPTION
Enable Select this option to turn on the rule.
Host IP Address Enter an IPv4 address associated with this rule.
Description Specify a description for the IP address associated with this rule. Enter up to 60 characters,
spaces and underscores allowed.
OK Click OK to save your changes back to the USG.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
