Chapter 26 BWM (Bandwidth Management)
USG20(W)-VPN Series User’s Guide
412
26.2.1.1 Adding Objects for the BWM Policy
Objects are parameters to which the Policy rules are built upon. There are three kinds of objects
you can add/edit for the BWM policy, they are User, Schedule and Address objects. Click
Configuration > BWM > Add > Create New Object > Add User to see the following screen.
Figure 285 Configuration >BWM > Create New Object > Add User
The following table describes the fields in the above screen.
Table 160 Configuration > BWM > Create New Object > Add User
LABEL DESCRIPTION
User Name Type a user or user group object name of the rule.
User Type Select a user type from the drop down menu. The user types are Admin, Limited
admin, User, Guest, Ext-user, Ext-group-user.
To Next Page
Loading...
