Chapter 32 File Manager
USG20(W)-VPN Series User’s Guide
615
Copy Use this button to save a duplicate of a shell script file on the USG.
Click a shell script file’s row to select it and click Copy to open the Copy File screen.
Figure 436 Maintenance > File Manager > Shell Script > Copy
Specify a name for the duplicate file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click OK to save the duplicate or click Cancel to close the screen without saving a
duplicate of the configuration file.
Apply Use this button to have the USG use a specific shell script file.
Click a shell script file’s row to select it and click Apply to have the USG use that shell
script file. You may need to wait awhile for the USG to finish applying the commands.
# This column displays the number for each shell script file entry.
File Name This column displays the label that identifies a shell script file.
Size This column displays the size (in KB) of a shell script file.
Last Modified This column displays the date and time that the individual shell script files were last
changed or saved.
Upload Shell
Script
The bottom part of the screen allows you to upload a new or previously saved shell script
file from your computer to your USG.
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .zysh file you want to upload.
Upload Click Upload to begin the upload process. This process may take up to several minutes.
Table 266 Maintenance > File Manager > Shell Script (continued)
LABEL DESCRIPTION
To Next Page
Loading...
