Displaying OSPF General Statistics 113
Modify the Dead
Interval
You can modify the virtual link dead interval.
The default dead interval is 40 seconds.
To modify the dead interval:
1 Enter the following at the top-level menu:
ip ospf virtualLinks dead
The following prompt is displayed:
Select virtual link (1-2|all):
2 Enter the virtual link ID.
Enter dead interval (1-65535) [40]:
3 Enter the value of the dead interval, in seconds.
Setting the Password You can set the virtual link password, which allows you to ensure that
only routers with the correct password can use a virtual link.
To set the password:
1 Enter the following at the top-level menu:
ip ospf virtualLinks password
The following prompt is displayed:
Select virtual link (1-2|all):
2 Enter the virtual link ID.
Enter virtual link password [none]:
3 Enter the password.
Displaying OSPF
General Statistics
To display general OSPF statistics, enter the following at the top-level
menu:
ip ospf statistics
To Next Page
Loading...
Need help?
General