6
SETTING SNMP AND SYSTEM
PARAMETERS
This chapter contains the following information:
■ Available SNMP Context Commands
■ Setting Up SNMP on Your System
■ Administering SNMP Trap Reporting
■ Available System Context Commands
■ Displaying the System Configuration
■ Installing System Software using TFTP
■ Enabling Timeout of Remote Sessions
■ Setting Passwords
■ Setting the System Name
■ Working with Nonvolatile Data
■ Initializing Data to Factory Defaults
■ Resetting the Module
See “Accessing the User Interface” on page 39, for information on
launching the user interface.
To Next Page