3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 24
 Adjust the height of the bed bolts to make each side level using the 3mm hex driver
from the toolkit.
 Underneath each of the 3 bed bolts is a locking nut which must be loosened with the
8mm spanner before the bolt can be adjusted.
 It may take several movements of the extruder, and consequent bolt adjustments to
ensure that the bed is level.
Loosen locking nut
to adjust bolt.

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English