15
Printer
Use the Printer option to set the printer output type.
Use the [Up] and [Down] arrow keys to select either
graphics or text output, then press the [Enter] key to
accept your selection and return to the Setup menu.
A custom Loss Frequency (sometimes known as
the “Nyquist frequency”) can be set for use in the
Wideband Autotest. The custom Loss Frequency edit
screen is accessed by pressing the [Setup] key from
the startup screen, selecting Autotest Limits, then
Wideband. Press the [Enter] key to select a service
type. Select Loss Frequency, then use the [Tab] key
to edit. Enter the frequency value in KHz with the
blue numeric keys. Use the [Up] or [Down] arrow
keys to add or remove digits.
To Next Page
Loading...
