21
Help
Press the [Help] key at any time in any screen to get
help on that function.
Press the [Enter] or [Return] key to return to the
previous screen.
High Voltage
This screen indicates that a high voltage (120 Vac/
Vdc or greater) has been detected between the test
leads when not in the Voltage Mode. The 965DSP
has opened an internal relay to protect itself
from damage. Use standard safety practices for
disconnecting the test leads since high voltage may
be present.
Press the [Enter] key to restart the 965DSP.
To Next Page
Loading...
Need help?
General
