Features and MenuCards Main Menu
105
After you have selected an MSN, an MSN group or all MSNs, select the type of call
forwarding (
Immediately
,
After Delay
or
Busy
) then enter the external des-
tination (
Dest.
).
Note: For this type of call forwarding, the (external) destina-
tion number is always entered without the line seizure code.
If you assign “Divert MSN” to a feature key (see also Programming Functions (Fea-
tures) starting on page 123), you can also enter a
Text
to label the key with. The
label is displayed in the OpenCom 100’s Configurator for informational purposes.
Activate the function using
On
. Activated call forwarding (
Immediately
,
After
Delay
,
Busy
) is indicated in the MSNs selection list by a “+” before the call
number. A “?” before the entry (e. g.
?ƒMSN Groupƒ1
) means that different call
forwarding types are activated in this group. Using the plus/minus
key
=, you can swich off an activated call forwarding.
Note: If “Divert MSN” is activated in the exchange (= exter-
nal call forwarding, configured by the system administrator),
it can take a few seconds after configuring for call forwarding
to be activated in the exchange.
4ƒDivert door
: This so-called “pharmacy line” forwards all calls from the
doorbell. If several door bells are configured on your communications system,
select first the door bell whose calls are to be diverted. How many door bells are
available and which names they are listed under in the menu, depends on the type
of entrance intercom you have. Consult your system administrator if you have
questions about the configuration of the door bells.
Enter the call number under
Dest.
as follows:
■ For external call numbers, enter the number directly if line seizure is auto-
matic. If line seizure is manual, enter the number after keying in the line seizure
code (the default setting is:
0).
■ For internal call numbers, enter the number directly if external line seizure is
manual. If external line seizure is automatic, enter the number after pressing
the star key twice
**.
You can activate the forwarding function with
On
, and deactivate it with
Off
.
To Next Page
Loading...
