Features and MenuCards Programming Keys
128
6.4.4 Status Key
If your communications system has been extended via a third-party programme,
you can operate individual functions of this programme via what are referred to as
the status keys of your system telephone. A status key is thus a kind of special
function key. It is programmed similarly to a function key.
Programming a Status Key
Deleting a Programmed Status Key
g Long press the programmable key, then …
PO select
Status key
and press the OK key.
PZO Select the
Key-ID:
item from the
Status key
MenuCard.
Enter the number (0 … 9) to be used for operating the pro-
gramme function. For information in this regard, please refer
to the respective programme documentation. Then press
the OK key.
Z O Select
Text:
to label the key. If you do not enter a text, the
key will be labelled with a default text. Press the OK key.
O The
Save
menu item is now selected. Press the OK key. The
programming is saved.
g Long press the programmed key, then …
P select
Delete key
.
O Press the OK key.
To Next Page
Loading...
