Features and MenuCards Programming Keys
125
You can also combine multiple functions on a single key. For more information on
this please see the section on Stacking or Linking Functions starting on page 125.
Changing a Programmed Feature Key
Deleting a Programmed Feature Key
6.4.3 Stacking or Linking Functions
You can also save multiple functions to a single feature key (stack or link func-
tions).
■ Stack: The functions stored in a stack are displayed in a MenuCard which is
assigned to a key. You can save destination numbers as well as functions in a
stack and select the desired destination number or function from this
MenuCard.
■ Link: Linked functions are executed consecutively after the relevant key is
pressed. This makes it possible to combine complex system telephone settings
ZO Select
Text:
to label the key. If you do not enter a text, the
key will be labelled with a default text. Press the OK key.
O The
Save
menu item is now selected. Press the OK key. The
programming is saved.
g Long press the programmed key, then …
Z/ P change the programmed function (e. g. the call number of a
call forwarding) or select another function.
O Confirm by pressing the OK key.
O The
Save
menu item is now selected. Press the OK key. The
programming is saved.
g Long press the programmed key, then …
P select
Delete key
.
O Press the OK key.
To Next Page
Loading...
