Telephoning General Functions
47
On the OpenPhone 75 incoming calls are signalled by means of a short tone; they
are also indicated on the display. If there are calls in the queue, the level indicator
appears at the beginning of the second line of the OpenPhone 75 display. If
several call numbers with call waiting queues are configured for your telephone,
the total number of entries appears.
For the System Administrator:
The “Call Queue” chapter in the “Mounting and Commissioning” guide explains
how to configure call waiting queues and set up a enquiry station using this
function.
2.2.4 Block Dialling/Automatic Dialling
If you activate the menu item
5 En-bloc dialling
in the MenuCard
Phone
settings
, you can enter all call numbers (and correct or add digits to them, if
necessary) without lifting the handset (see MenuCard “Phone Settings” starting on
page 108). The number is displayed in the info line. Entries from the redial list, the
call list and the telephone book that are to be dialled using
O also appear in
the info line first. The number you have selected is not dialled until you lift the
handset or press the hands-free/open-listening key
L.
If block dialling is switched off, the telephone switches to open-listening mode as
soon as you enter a call number and dial it.
Block Dialling and Headset Operation
It is useful to activate the “block dialling” feature when using a headset (if you have
activated this via the MenuCard
Phone settings
, see page 109). The call
number entered will only be dialled once you have pressed the headset key
K.
Once block dialling has been activated and the headset switched on, the phone
immediately switches over to headset operation and the call number is dialled
when you enter a number on the phone.
Dialling a different user or a different terminal
You can also use your system telephone for dialout with a headset. To do so, save a
destination call number on your system telephone (via the MenuCard
Connec-
tions
, the menu entry
2ƒDial
:
0ƒRemote dialling
, please refer to page 113
also). The saved call number will be dialled automatically when you press the
headset key within 30 seconds. After 30 seconds, the dialout will be deactivated
automatically.
To Next Page
Loading...
